Transformers>>FLM-40W-12V-LED Dimm

FLM-40W-12V-LED Dimm

    The actual transformer is encapsulated in the enclosure. The Input leads are 20 AWG and output leads are 16 AWG. Lead insulation is 105C.
    To be used specially with our LED Light Bulbs.

    Enclosure:
    Enclosure temperature will not exceed 70C at a 40C ambient. Wiring compartment has 2 knockouts sized for 3/4 inch screw cable connectors. The removable cover for the wiring compartment is secured in place by a screw. The enclosure is black powder coated.

    General Information:
    Dimensions in inches: Length 5.03", Width 2.14", Depth 2.00"
    Max Load: 40 W
    Input Voltage: 120V 60 Hz
    Output Voltage Full Load: 11.4 V
    Input Current Full Load: 360 mA
    Open Circuit Volts: 12.5 V
    Output Current Full Load: 3.32 A
    Efficiency: 90.30%
    Thermal Class B: 130C
    Leads Primary PVC: 600V #20
    Leads Secondary PVC: 300V #16
    Coil Former Double Section Bobbin
    Manual reset thermal circuit breaker on the secondary side.
    Controlled with a low-voltage dimmer.
    ETL listed, CSA listed, UL standard 5085-1